QL2200 & IBM Shark with NW6.5

[Phil Smith]

We have just installed our first NW6.5 server onto our network, and are
attempting to connect it to our SAN (IBM F20 Shark).

On the SAN, I have assigned 9 'volumes' to the server. However, when I try
to attach them, I can only see 8 disks (Device 0:0 through 0:7).

I have back rev'd the QL2200.HAM file to that in NW6SP4e (as per TID
10090472) to no avail. Has anyone any idea what to try next?

[Rich Chicallo]

Phil,

I just migrated off an F20 to an 800. Did you configure the card for the
connection to the Shark using IBM's guide?

Post by Phil Smith
We have just installed our first NW6.5 server onto our network, and are
attempting to connect it to our SAN (IBM F20 Shark).
On the SAN, I have assigned 9 'volumes' to the server. However, when I try
to attach them, I can only see 8 disks (Device 0:0 through 0:7).
I have back rev'd the QL2200.HAM file to that in NW6SP4e (as per TID
10090472) to no avail. Has anyone any idea what to try next?

[Phil Smith]

Problem solved.

The card was set by default to only show as 8 LUNs (Thanks Dell). Changing
the setting in the Advanced section of the QL2200's bios (Alt Q at boot
time) did the trick.